Show Shine Wash
Preparation is everything. Barrett-Jackson Show Shine Wash mobilizes contaminants such as dirt, grease and grime to leave your car fresh and prepared for polishing or final waxing. Show Shine Wash contains its own wax so you can use it every day to maintain a great look, or use as step 1 in our show-car preparation process.
Show Shine Wash is mixed with warm water and clears away ingrained grime and pollutants to leave bodywork in prime preparation for scratch removal treatment. It can also be used as a general wash followed by Protective Shine Wax.
Rapid scratch remover
The Engineered Diminishing Abrasive formula inside Barrett-Jackson Rapid Scratch Remover quickly and effectively removes unsightly surface scratches and scuffs without harming the paint finish surface.
Using Rapid Scratch Remover is simple. Apply a small amount of product to a slightly dampened Rapid Applicator. Using medium pressure, rub across the scratch in straight back and forth movements, changing direction regularly. Repeat until the scratch has gone. Buff with the Deep Shine Cloth to achieve an excellent shine.
Rapid Scratch Remover works well on its own or use as step 2 in our show-car preparation process.
Deep Shine Micro-Polish
Deep Shine Micro Polish also uses Engineered Diminishing Abrasives but in a reduced strength formula for use on larger surface areas. The formula inside Barrett-Jackson Deep Shine Micro-Polish gently and effectively removes blemishes and color fading from panels, leaving you with a flawless showroom finish without harming the paint surface.
Apply with a light, even pressure in a circular motion. Remove excess residue and shine with a clean and dry Barrett-Jackson Deep Shine Cloth.
Barrett-Jackson Deep Shine Micro-Polish works well on its own or use as step 3 in our show-car preparation process.
Protective shine wax
Protective Shine Wax contains a unique interlinked molecular blend of two waxes - polymer wax to aid bonding to the surface, paraffin wax to make the wax spread easier and hard carnauba wax for a tough glaze and UV protection.
Simply add a small amount of Protective Shine Wax to the Rapid Applicator and apply in an overlapping circular motion with even pressure. Allow to dry to a cloudy finish before shining to a mirror gloss with a clean and dry Deep Shine Cloth.
Barrett-Jackson Protective Shine Wax works well on its own or use as step 4 in our show-car preparation process.
Rapid Detailer is the perfect companion to the other Barrett-Jackson Signature Car Care products. It will keep your car looking immaculate at all times. A state-of-the-art everyday product that combines a unique mild cleanser with a fast drying liquid wax. Rapid Detailer will lift loose contaminates and fingerprints quickly on all exterior surfaces of your car while retaining the perfect, just waxed, glamour finish.
Lightly spray the area to be cleaned and in a circular overlapping motion using a soft, dry microfiber cloth, immediately wipe over the surface to remove dust and light grime. Turn the cloth over and buff the surface until a gloss finish is achieved.
The mild formula in Rapid Detailer means you can use it every day.
Smoothing Clay Bar
The Barrett-Jackson Smoothing Clay BarTM removes contaminates such as tree sap, acid rain and industrial fallout leaving paintwork with a mirror smooth finish.
Knead the clay into the centre of the Barrett-Jackson Pro Clay HolderTM provided. Lubricate the selected area of paintwork with Barrett-Jackson Rapid Detailer and gently rub the clay bar over the surface until all stubborn grit is removed, always checking the clay bar for hard contaminants that could damage your bodywork. If found remove the clay from the holder, pick out contaminants, knead and reform the clay and place back in the holder to continue use.
Rapid Applicators are custom engineered for an even, uniform application, designed to reduce effort and increase effectiveness when applying Barrett-Jackson Signature Car Care products.
Using the specially designed Red Rapid Applicator, lightly dampen and apply the Rapid Scratch Remover in an even up and down motion. Change direction regularly to ensure even use. When a suitable finish is achieved, remove any residue and buff with the Barrett-Jackson Deep Shine Cloth.
Now using the Black Rapid Applicator, apply the wax or polish in an overlapping circular motion with an even pressure. Allow to haze up and buff to a mirror finish with the Barrett-Jackson Deep Shine Cloth.
To keep Rapid Applicators in optimum condition, following use wash out with warm water and store in a sealed plastic bag.
Waffle Foam Polishing Pad - 8 Inch
The Barrett-Jackson Signature Car Care Waffle Foam Polishing Pad has been engineered to maximize the effectiveness and results of Barrett-Jackson Deep Shine Micro-Polish when applied with a rotary buffer, to remove swirls and produce a high gloss deep shine finish. Made from custom engineered foam to produce a flawless finish.
Lambswool Compounding Pad - 8 Inch
The Barrett-Jackson Signature Car Care Lambswool Compounding Pad has been engineered to maximize the effectiveness and results of Rapid Scratch Remover when applied with a rotary buffer, to quickly remove finishing sanding marks and paint defects such as heavy scratches, scuffs and oxidation. Made of soft lambswool to both quickly cut, yet leave minimal swirls. Follow by polishing with Barrett-Jackson Deep Shine Micro-Polish and 8” Waffle Foam Polishing Pad with a rotary buffer to produce a high gloss swirl free finish.
Deep Shine Cloth
To get the best results from Barrett-Jackson Signature Car Care products, using the highest quality microfiber cloth available is essential. The Barrett-Jackson Deep Shine Cloth is designed to be used as a final buffing cloth, essential for ease of use and delivering a scratch-free, streak-free, high gloss finish time after time.
Always ensure your Deep Shine Cloth is free from dirt and grit. Fold over to form a pad and buff the surface until a high gloss finish is achieved. To keep your Deep Shine Cloth in optimum condition, wash occasionally in a mild detergent and dry thoroughly.
The Barrett-Jackson Signature Car Care Backing Plate is specifically designed to fit 5/8 inch diameter shaft rotary buffers. Provides smooth, balanced machine polishing with both the Barrett-Jackson Signature Car Care 8” Lambswool Compounding Pad and 8” Foam Polishing Pad for creating superior results.